Plan and price basement shelving from a LiDAR scan

A Redditor gave Claude a cluttered LiDAR scan of their basement and one prompt; over about 110 steps it measured the room, fit four shelving setups from real products and priced them from $420 to $5,000.

Done withClaude· Nov 16, 2026

What they did

The poster made one quick LiDAR pass of an uncleaned, junk-filled basement and handed the scan to Claude running Fable 5.2 with a single prompt. From there the model worked alone for about 110 steps. It separated the room from the clutter, rebuilt it in 3D, laid out four shelving options based on real products (Husky or Gorilla steel racks, Cambro rolling shelving, Seville chrome wire on wheels, Member's Mark plastic from Sam's Club), rendered each from three angles, assigned shelves to walls and priced every option.

How it went

It measured the room at about 15.7 by 21.5 feet, with an 85 inch ceiling dropping to 81 inches at the window end. The plans ranged from $420 to $490 for 140 feet of plastic shelving up to $4,000 to $5,000 for plastic on wheels; chrome wire on wheels gave the most space, 160 feet, for $1,330 to $1,570. It warned that a 77 inch steel rack on the partition wall would leave under 4 inches below the low ceiling. It also flagged its own gaps: the top price was a guess from one confirmed size, the wheeled wire racks had no published load rating, and one shelf colour was unconfirmed.

Worth knowing

By the model's own rough estimate the run used about 20 million tokens, around 95 percent of it re-reading its own growing context. The post does not say which app or harness ran it, nor how the scan was made, which several commenters asked about; others noted a tape measure gets the room size too.

Try it

With Claude· 4 parts to fill in

Here is a 3D scan of [room] that is still full of stuff: [scan file]. Work out the real room dimensions under the clutter, including ceiling height changes, doors and windows. Then design [number] storage layouts using shelving products you can actually buy at [stores or budget range], decide which wall each unit goes on, check clearances against the ceiling and openings, and price each layout. Mark every price or spec you could not confirm. Stop and show me the plans side by side before suggesting anything to buy.

Square brackets are the parts to fill in. The prompt is ours; the story is theirs.

Where they said it

Related