Port Debian to a locked Android tablet and reverse engineer its drivers

A Redditor had Claude Code put native Debian on a locked Ouzrs M1 tablet. It bricked the device first, recovered it over a serial port, got the drivers working and found the 4 GB of RAM was really 2 GB.

Done withClaude Code· Nov 16, 2026

What they did

A Redditor, u/MrSimpatia17, wanted native Debian on a cheap Ouzrs M1 tablet that shipped with Android 11 Go, a locked bootloader and no way to change the ROM. Taking cues from an existing RK3562 Debian project on GitHub, they handed the job to Claude Code. The agent first tried flashing an ARM Debian image with Rockchip's flashing tools. After that failed, the poster opened the tablet, found a serial port on the board and had Claude Code drive the recovery over a USB-to-serial adapter. From there the agent discovered the tablet could boot from an SD card and worked through the hardware one driver at a time.

How it went

The first flash bricked the tablet completely, and the project stalled for weeks while a serial adapter arrived. After trial and error over serial, the tablet booted into Debian, and the agent got the drivers working one by one. Along the way it found that the advertised 4 GB of RAM was fake and the tablet has 2 GB. The poster says performance is mediocre, video streaming is about the same as Android and menus feel snappier, but the tablet can now get updates. They had not yet published the work.

Worth knowing

Expect to brick the device: recovery here needed a USB-to-serial adapter and physically opening the tablet, and the poster also bought a soldering iron they ended up not needing. Commenters noted fake RAM figures are common on cheap Chinese tablets and can fool tools like CPU-Z.

Try it

With Claude Code· 4 parts to fill in

Help me install [Linux distribution] natively on my [device model], which has [SoC] and a locked bootloader. Start by reading [reference project or docs] and listing the boot options this hardware supports, such as SD card, USB or serial. Before you flash anything to internal storage, tell me exactly what you will write, how it could brick the device, and how we would recover, and wait for my go-ahead. Prefer booting from external media first. Then bring up the drivers one at a time, logging what works and what does not, and check the real hardware specs against what the vendor claims. Stop and ask me before any step I cannot undo.

Square brackets are the parts to fill in. The prompt is ours; the story is theirs.

Where they said it

Related